Datasheets

Protection for the walls that matter most

Heroes Shield is an advanced anti-mould paint that keeps walls warmer, reducing condensation and creating an environment where mould can’t grow. Suitable for walls and ceilings throughout the home, but especially effective in rooms prone to mould such as bathrooms, kitchens and bedrooms.

Properties

Finish: Matt
Type: Water-borne acrylic emulsion
Use: Interior
Coverage: Approx. 6–7 m² per litre on smooth surfaces*
Coats: 2
Application: Brush, roller or airless spray
Application temperature: 5°C–20°C
Touch dry: Within 30 minutes
Recoat time: 1–4 hours
Shelf life: 12 months from manufacture in a sealed container

*Coverage may vary depending on the surface. Rough or uneven surfaces will require more paint.

Application

Stir the paint thoroughly before application. Apply the first coat of Heroes Shield evenly across the prepared surface. Apply the paint at the recommended coverage rate. Avoid overapplying the paint, as it may affect drying times and finish quality. Two coats are sufficient. Avoid exposing the painted surface to water or heavy moisture for at least 12 hours after application to prevent discolouration or poor adhesion.

Paint that does more

Heroes Pure is a premium air purifying paint for interior walls and ceilings throughout the home. Available in a range of colours, it provides excellent coverage, a smooth matt finish and the durability needed for everyday family life.

Properties

Finish: Matt
Type: Water-borne acrylic emulsion
Use: Interior
Colours: Full colour range via tintable base system
Coverage: Up to 14 m² per litre on previously painted walls
Coats: Two
Application: Brush, roller or airless spray
Application temperature: 5–20°C
Touch dry: Within 30 minutes
Recoat time: 1–4 hours

Application

Stir the paint thoroughly before application. Apply the first coat of Heroes Pure evenly across the prepared surface. Apply the paint at the recommended coverage rate. Avoid overapplying the paint, as it may affect drying times and finish quality. Two coats are normally sufficient. Strong colours may require a third coat. Avoid exposing the painted surface to water or heavy moisture for at least 12 hours after application to prevent discolouration or poor adhesion.

Clear the way for a healthier home

Heroes Mould Remover is a simple, effective way to tackle mould and mildew before you decorate. Suitable for bathrooms, kitchens and other areas prone to damp, it helps keep surfaces clean and residue-free.

Easy to use and barely noticeable in odour, it’s the first step to getting your walls ready for what comes next.

Properties

Colour: Clear
Odour: Barely perceptible
Form: Liquid
Suitable surfaces: Hard, colour-fast surfaces
Typical use: Bathrooms, kitchens and other damp-prone areas
Solubility: 100% soluble in water

Application

1. Spray a generous coat on the affected area at a distance of 15 – 20 cm

2. Leave the product to dry

3. Once dry agitate the affected area using a soft brush or pad

4. Wipe off the mould /mildew reside using a damp cloth or kitchen towel and rinse the area thoroughly with clean water

5. For stubborn stains it may be necessary to re apply and repeat steps 1 to 4